ADJUSTMENT

Service Mode

Self Check

"Self Check" screen is shown by pressing "9" button on Remote Control during display of Service Mode menu (Except for Hotel Mode menu).

	Item	Explanation/Data Format
1	TV Model	"Model name "+"_"+" Panel vendor" e.g.24HV10_CMI, 32A150C_SAM Model name:  19HV10G, 24HV10G, 32HV10G Panel vendor:  SAM : SAMSUNG, AUO : AUO, CMI : CMI LGD : LGD, SHA : SHARP
2	APP SW Version	Version information of Application SW.
3	Data Version	Data Version of Memory data list.
4	HDCP key	HDCP key in the memory. Pass[FLASH]  : HDCP key is detected in Flash-ROM Pass[EEPROM]  : HDCP Key is detected in External EEPROM Fail  : HDCP key is not detected * When the system boot up, the system detect valid HDCP Key At first, the system checks if HDCP Key is available or not in Flash-ROM. If no available, the system checks if HDCP key is available in External EEPROM as 2nd step. If no available, "Fail" should be displayed.
5	A/D Adjust COMP SD/HD	A/D adjustment status for Component input (SD/HD) OK  : A/D adjustment is set correctly. NG  : A/D adjustment is not set correctly. — : A/D adjustment is not needed because the picture format is not used.
6	POT (Power On Time)	Total time the TV has been powered on. (Unit: Hours) (Decimal)
7	AST (AC Supply time)	Total time the TV has been plugged in. (Unit: Hours) (Decimal) (It Includes standby mode)
8	MAIN FORMAT	Video format information (e.g. 480i60, 1080i50)
9	MAIN TUNER FREQ.	Displays tuned frequency (Unit: kHz) (Decimal)
10	BL_STATUS 1 (Only 24/32HV10)	The number of times that the backlight failed to turn on at the first attempt in the power-on sequence. (Decimal)
11	BL_STATUS 2 (Only 24/32HV10)	The number of times that the backlight failed to turn on at the second attempt in the power-on sequence. (Decimal)